VDA 5 Training Course - Capability of Measurement Processes for QMS Quality Management System in the German Automotive Manufacturing Industry (VDA QMC- Die deutschen Automobilhersteller)

VDA 5 Training Course For Capability of Measurement Processes
Objectives of VDA 5 Standard Training Course
The VDA 5 Standard Training Course (Capability of Measurement Processes) provides knowledge and skills on assessing, controlling, and improving the accuracy of measurement processes in the automotive industry.
I. Objectives of VDA 5 Standard Training Course
1. Understand the requirements of VDA 5 standard:
+ Grasp the basic principles, requirements, and procedures for applying VDA 5 standard.
2. Calculate and control measurement uncertainty:
+ Provide guidance on how to determine and assess the uncertainty of measurement processes.
3. Assess the capacity of measurement processes:
+ Provide skills to analyze and assess the capacity of measurement systems to ensure compliance with technical requirements.
4. Building an effective measurement system:
+ Support businesses to establish a reliable measurement system, minimize deviations and optimize production processes.
5. Detect and improve measurement errors:
+ Increase the ability to identify the root causes of measurement errors and implement improvement measures.
6. Compliance with customer requirements and international standards:
+ Support businesses to meet the technical requirements of OEMs and standards such as IATF 16949, ISO 9001.
II. Main requirements of VDA 5 standard
1. Measurement Uncertainty Management and Analysis:
+ Ensure that all measurements are evaluated for accuracy, with uncertainty properly calculated and controlled.
2. Measurement Capability Assessment:
+ The measurement system must meet the capacity criteria to ensure accurate and reliable measurement results.
3. Controlling influencing factors:
+ Identifying and minimizing factors that affect measurement results, including:
+ Equipment stability.
+ Competency of personnel performing measurements.
+ Environmental conditions.
4. Establishing standard measurement procedures:
+ Developing standardized measurement procedures to ensure consistency in measurement.
5. Documenting measurement data:
+ All measurement results must be recorded, stored and analyzed for continuous improvement.
6. Conducting periodic assessments:
+ The measurement system must be periodically inspected and calibrated to ensure continuous capacity.
7. Synchronize with other quality management standards:
+ Combine with standards such as IATF 16949 and ISO 9001 to ensure a comprehensive quality management system.
8. Training and improving human resources capacity:
+ Participating personnel must be trained to understand and perform measurements correctly according to VDA 5 standards.
III. Benefits after VDA 5 standard training course
1. Ensure product quality:
+ Accurate measurement system helps ensure products meet technical and quality requirements.
2. Reduce risks in production:
+ Detect and eliminate measurement errors, thereby reducing the risk of defective products.
3. Increase customer trust:
+ Ensure OEM customers trust in the measurement capacity and product quality of the enterprise.
4. Improve production efficiency:
+ Effective measurement process helps optimize product inspection time and costs.
5. Support continuous improvement:
+ Measurement results are analyzed to improve the measurement system and production process.
6. Compliance with international standard requirements:
+ Meet strict standards of the automotive industry and technical requirements of customers.
7. Increase competitiveness:
+ Strong measurement capabilities help businesses participate in the global supply chain with higher reputation.
IV. Steps to implement VDA 5 standard
1. Evaluate the current measurement system:
+ Check the suitability of the measurement system with the requirements of VDA 5 standard.
2. Training and development of personnel:
+ Organize training courses to improve awareness and measurement skills for the staff.
3. Analysis of measurement uncertainty:
+ Perform calculations and analysis to assess the uncertainty of the measurement process.
4. Building and improving measurement processes:
+ Optimizing measurement processes to achieve the highest efficiency and accuracy.
5. Integrating with quality management systems:
+ Synchronizing VDA 5 with standards such as ISO 9001 or IATF 16949.
6. Continuous monitoring and evaluation:
+ Ensuring that the measurement system is always maintained effectively through periodic assessments.
Thus, the VDA 5 standard training course conducted by VINTECOM International aims to help businesses improve their measurement capabilities, ensure product quality and production processes, and meet the strict requirements of the automotive industry.
VDA Volume 5 also contains the well-established and widely used procedures of the MSA manual that are used in order to evaluate and accept measuring equipment. It provides some information about the validation of measurement software as well.

In order to ensure the functionality of technical systems, single parts and assemblies have to keep specified tolerances. The following aspects must be considered when determining the necessary tolerances in the construction process:
+ The functionality of the product must be ensured.
+ Single parts and assemblies must be produced in a way that they can be assembled easily.
For economic reasons, the tolerances should be as wide as possible, but for functionality reasons, it should be as narrow as necessary.
The expanded measurement uncertainty must be considered in statistical tolerancing.
Due to the measurement uncertainty, the range around the specification limits does not allow for a reliable statement about conformance or non-conformance with specified tolerances. This might lead to an incorrect evaluation of measurement results. For this reason, it is important to consider the uncertainty of the measuring system and the measurement process as early as in the planning phase

I. Mode of Training:
1. Inhouse training or Public training (Number of learner: 10 persons/ 01 course)
2. Training location: as required by the learner at the customer location or VINTECOM International office in Ha Noi City & Ho Chi Minh City.
3. Training subjects: individuals, organizations and enterprises in need.
4. Training time: Please contact VINTECOM International office.
II. Subjects should participate in the training course:
1. Internal process auditors, individuals are assigned to manage QA/QC.
2. The process auditor of provider.
3. The key personnel at departments in the organization (to understand and properly apply ISO/ IATF/ VDA)
4. Middle and senior managers (to understand and direct)
5. Managers of quality management department, head of department, deputy of department and personnel of QA/ QC department.
III. Information of training course:
1. Training experts are approved capacity according to VINTECOM International standards, at least 10 years of experience in training, teaching, management consultancy or approved the lead auditor that registered by an international certification body.
2. Fully equipped the training support facilities including quality standards for learners.
3. The course includes group practice, situations, review and knowledge test exam after the end of the course.
IV. What do you get when you participate in the course:
1. Opportunity to learn in a professional environment, a training expert team has knowledge and skills that are approved according to VINTECOM International standards.
2. Understand the standard requirements, help learners be able to apply the necessary procedures and records into real work.
3. Ensure that you have enough necessary knowledge to convey to your employees and laborers understand how benefits of knowledge added and it will bring opportunities to them in current work.
4. Know how to solve arising problems or unexpected results in quality management to build appropriate measures to solve the current difficult problems that the factory is facing.
5. Saving costs and time, improving efficiency and productivity, solving quality problems and improvements are increasingly enhanced.
V. Training certificate for completing course
Learners fully participate in the course duration and take the exam to reach at least 55/70 points for the internal auditor and 75/100 for the lead auditor and the auditor of provider will get the certificate that is issued by VINTECOM International.

VINTECOM Trainer are approve with full capacity, qualifications and experience according to international standards of VINTECOM experts, ensuring at least 10 years of experience in quality management, having participated in implementation for foreign companies and corporations. production technology in the Global supply chain such as: BMW, Mercedes, Porsche, Bosch, Nidec, Hyosung, Olympus, SamSung, Canon... with the role of trainer, assessor, understanding and application Proficient in quality productivity management tools to improve and enhance production processes such as: 5 core tools, Lean production, 5S, TPM, 7Muda, 8D, 7QC

📶📶📶 Contact us to register for VDA 5 Training course

Customers, organizations and enterprises require VDA 2 Training course of the Capability of Measurement Processes, please click on "Registration - Quotation" or on the right toolbar below the PC screen to receive a quotation for training, consulting and certification services.

📶📶📶 Further information, Please contact us as below:

🌐 VINTECOM International Office in Ha Noi City: 16th Floor - Green Stars City, 234 Pham Van Dong, Bac Tu Liem District, Ha Noi City. Hotline 094-886-5288/ (024) 730-588-58

🌐 VINTECOM International Office in Ho Chi Minh City: D8-09 Rosita Khang Dien, Thu Duc City, Ho Chi Minh City. Hotline 0938-083-998/ (028) 7300-7588