The VDA 6.3 training course - Process Audit Standard of Quality Management QM in the Automotive industry at Halla Electronics Vina Company (Korea) is qualified to enter the component supply chain into the German and World Automotive chain.

The VDA 6.3 training course, Process Audit standard of the Germany Automotive Task Force for Halla Electronics Vina (Korea)

VDA 6.3 Training Course - Process Audit Standard for Quality Management QM in the Automotive Industry

VINTECOM International has signed a cooperation agreement with Halla Electronics Vina company to provide training course of process audit VDA 6.3 developed by Germany Automotive Task Force (VDA-QMC) to audit process capability of strict produced in the Germany automotive manufacture industry as well as the open development for OEM automotive manufacture all over the world.

The VDA 6.3 process audit has been established for almost three decades as an important method for identifying strengths and weaknesses.
It involves analyzing and evaluating process capability during the product de- velopment and product implementation phase.
The characteristics of VDA 6.3 are:
- a structured approach to analyzing processes
- an evaluation and points system
- clear downgrading rules
- identification of specific product and process risks (questions marked with an asterisk, i. e. *-questions)
- a clear presentation of the results of the process evaluation (A, B or C)
- worldwide comparability of the results for similar products and pro- cesses
- potential analysis for evaluating the suitability of new suppliers, loca- tions, and technologies prior to awarding a contract
- a focus on the process and the product rather than on the system
The VDA 6.3 process audit is integrated into a company’s QM system and contributes to the fulfillment of the requirements according to IATF 16949.

Scope of the VDA 6.3
A process audit is a method for impartial analysis and evaluation of product development and implementation processes as well as their effectiveness.
Process audits can be used internally as well as externally throughout the en- tire product life cycle and fulfill the requirements specified in IATF 16949. Pro- cess audits are suitable for small or medium-sized companies as well as
large corporations.
In general, this volume can be used throughout the entire product life cycle. In this regard, a distinction is made between:
- Potential analysis
- Product and production process development
- Product and production process implementation
- series production
When conducting process audits, the selection of process elements and the implementation period may vary.
During series production, the process audit serves to ensure regular monitor- ing of the series production processes and can also be used on an event-ori- ented basis.
The aim of the process audit is to determine whether the processes/process steps fulfill the process and product requirements and specifications. Any dis- crepancies detected are evaluated in accordance with a points system with regard to the process/product risk and are documented as audit findings. The objective is to determine to what extent potentially non-compliant products
are to be expected based on the audit findings, as well as to identify the asso- ciated risks.

Process audit auditor training course VDA 6.3 of VINTECOM International helps Halla Electronics Vina and automotive manufacturers set up process audit method meet the process elements P from potential analysis, project management to production analysis and customer support.

At present, VDA 6.3 has the latest version of process audit add process elements requirements and audit based on classification score of process capability and downgrading rules of total the compliance level. On that basis, manufacturers must continually improve production processes based on risk and their process capability to meet the increasing request of customers for quality, stability and safety in the global automotive supply chain.

Currently, VINTECOM International training experts are fully approved for qualifications, experience, and have at least 10 years of quality management experience, having participated in implementing for FDI companies, manufacturing technology corporations in the global supply chain such as: BMW, Mercedes, Porche, Hyundai, Bosch, Nidec, Hyosung, Olympus, SamSung, LG, Partron... as training instructors, assessment experts, understanding and proficiently applying quality productivity management tools to improve and enhance the capacity of production processes such as: VDA 6.3, IATF 16949, PSCR, 5 core tools, Lean 6sigma, 8D, 7Muda, TPM,...

📶📶📶 Contact to register for Training and Consulting services for VDA 6.3, AIAG CQI-xx, IATF 16949 certification.

Customers, organizations and enterprises require the Training course, Consulting or Certification services of VDA 6.3, AIAG CQI-xx, IATF 16949, please click on "Registration - Quotation" or on the right toolbar below the PC screen to receive a quotation for training, consulting and certification services.

📶📶📶 Further information, Please contact us as below:

☎ VINTECOM International Office in Ha Noi City: 16th Floor - Green Stars City, 234 Pham Van Dong, Bac Tu Liem District, Ha Noi City. Hotline 094-886-5288/ (024) 730-588-58

☎ VINTECOM International Office in Ho Chi Minh City: Rosita Khang Dien - Thu Duc City, Ho Chi Minh City. Hotline 0938-083-998/ (028) 7300-7588

VINTECOM INTERNATIONAL MANAGEMENT CONSULTANCY COMPANY

Head Office: No. 5 Hoang Sam treet, Nghia Do, Cau Giay district, Ha noi City

HANOI VINTECOM INTERNATIONAL OFFICE

Address: 16th Floor - Green Stars City

234 Pham Van Dong Street, Bac Tu Liem District, Ha noi City

Tel : (024) 730.588.58/ (024) 730.333.86

Hotline: 094 886 5288

Skype: kd.vintecom

Email : office-hn@vintecom.com.vn

Web : www.vintecom.com.vn

HCM VINTECOM INTERNATIONAL OFFICE